mobiler VECTOR VS für Sitzeinbau

 

VECTOR VS – pneumatic cable balancer for workloads up to 388 kg

 

The pneumatic cable balancer VECTOR VS facilitates hand-guided movement of workloads of all kinds. A clearly arranged operating unit makes VECTOR VS easy to handle.

VECTOR VS für Scheiben

Personal absences due to illness and injury can be reduced by VECTOR VS, which effectively relieves the company’s personnel in lifting, tilting and moving of medium or heavy loads. With a stroke of 1.000 to 3.000 mm and a lifting capacity of 55 up to 388 kg VECTOR VS is suitable for a large range of applications.

VECTOR VS ist clean and nearly maintenance-free. With the material of all its components and no need of lubrication the operation under clean-room-conditions as well as in hazardous areas is enabled. VECTOR VS can also be supplied in stainless steel for pharmaceutical or food industry.

 

Safety

With a noise level of less than 65 dB (A) VECTOR VS poses a very low noise exposure to a company’s personnel. A safety brake system prevents an uncontrolled shoot up of the rope after the workload has been dropping down. An overload protection prevents damages of the lifting device due to overload. If the stroke power exceeds the maximum payload of VECTOR VS the balancer shuts-off immediately.

 

Versatility

Depending on the purpose of application, a number of different controls are available (up-down-control, balancing-control). VECTOR VS can either be fixed to a rail system or to a pivoted swivelling-jib-crane. Therefore the handling system can be installed in almost every hall layout.

These balancers contain a stationary ball screw. The ball screw is held in position by two hex head bolts (through the end cap and end cover). Two pins in the end cover engage notches on the end of the ball screw to prevent it from rotating. The reel assembly, consisting of reel, ball nut and thrust bearing, rides on the ball screw. The piston contacts the thrust bearing and travels back and forth with the reel assembly. The piston does not rotate.

Compressed air powers the balancer. It is controlled by an external control package. Air enters or leaves the piston chamber through a single hole in the end cap. This compressed air causes the piston to move laterally. The piston pushes against the thrust bearing, causing the reel to move laterally along the ball screw and winds up the wire rope. The load or hook travels down when the air is exhausted from the piston chamber through the control package into the atmosphere.

 

Controls:

Several controls are available (up-down-control, balancing-control) for VECTOR VS. In addition to the standard up-down-control IHF-JUNGENTHAL Handhabungstechnik GmbH offers a balancing-control as well as a balance-control with electronic load detection.

vector vs68-sk4 2

Up-down-control (AS):

Up-down-control is a pneumatic system which is activated by a control handle and mounted in the gripper housing. By this control handle the direction and velocity of the gripper are determined.

 

Balancing-control (BS1):

This type of control is a pneumatic regulating system which by means of switching on / off automatically activates a pre-set load according to the load selected with the "Manipulator loaded / unloaded"-switch and thus activates the low friction drive. Utilising this system it is possible to perform easy and accurate vertical movements without operating any controls.

Balance-control with electronic load detection (BS-AL):

The load will be lifted by using the switch „Up“. As soon as it is brought into a floating position, the balance-control will automatically save the preset load. The load now can be moved around the complete working radius.

By using balance-controls loads can be lifted, lowered and moved easily and accurately.

 

A variety of models

 

VECTOR VS is available as single wire, double wire, Tandem single wire and Tandem double wire model.

 

Type

Model

Load capacity

[kg]

Stroke

[mm]

Æ

[mm]

Weight [kg]

 

 

 

 

 

 

VS 68-2032

A

58

2032

165

23

VS 90-3048

A

78

3048

254

28

VS 147-2032

A

124

2032

254

28

VS 158-2032

A

136

2032

254

28

VS 227-2032

A

194

2032

254

50

 

 

 

 

 

 

VS 181-1524

B

180

1524

254

30

VS 294-1016

B

248

1016

254

30

VS 317-1016

B

272

1016

254

30

VS 453-1016

B

388

1016

254

52

 

 

 

 

 

 

VS 181-3048

C

155

3048

254

56

VS 294-2032

C

248

2032

254

56

VS 317-2032

C

272

2032

254

56

VS 453-2032

C

388

2032

254

100

 

 

 

 

 

 

 

 

 

 

 

Load capacity at 6 bar operating pressure

 

 

JSN Epic template designed by JoomlaShine.com